CHAPTER TITLE WEB GRAPHICAL USER INTERFACE (GUI) FOR ESMS
4-34
this ratio of pre-configured entries to run-time configurable
entries can be reallocated if necessary.
Figure 4-24. PEF Management – Event Filter
The fields of PEF Management – Event Filter Tab are explained
below.
This page contains the list of configured PEF’s.
Procedure:
1. Click the Event Filter Tab to configure the event filters in
the available slots
2. To Add an Event Filter entry, select a free slot and click
Add to open the Add event Filter entry Page. A sample
Table 4-24: PET Management - Event Filter
I
TEM DESCRIPTION
PEF ID
This field displays the ID for the newly
configured PEF entry (read-only).
Filter configuration Check box to enable the PEF settings.
Event Filter Action
Check box to enable PEF Alert action. This is a
mandatory field.
Event Severity
To choose any one of the Event severity from the
list.
Sensor Name
To choose the particular sensor from the sensor
list.
Add
To add the new event filter entry and return to
Event filter list.
Modify To modify the existing entries.
Cancel
To cancel the modification and return to Event
filter list.
Table 4-24: PET Management - Event Filter (Continued)
I
TEM DESCRIPTION
To Next Page
Loading...
