CHAPTER TITLE WEB GRAPHICAL USER INTERFACE (GUI) FOR ESMS
4-40
Procedure:
1. In the LAN Destination Tab, choose the slot to be config-
ured. This should be the same slot that you have selected
in the Alert Policy Entry- Destination Selector field. That is
if you have chosen the Destination Selector as 4 in the
Alert Policy Entry page of Alert Policy Tab, then you have
to configure the 4th slot of LAN Destination Page.
2. Select the slot and click Add. This opens the Add LAN
Destination entry.
Figure 4-29. Add LAN Destination entry Page
3. In the LAN Destination field, the destination for the
newly configured entry is displayed and this is a read only
field.
4. In the Destination Type field, select the one of the types.
5. In the Destination Address field, enter the destination
address.
6. Select the User Name from the list of users.
7. In the Subject field, enter the subject.
8. In the Message field, enter the message.
9. Click Add to save the new LAN destination and return to
LAN destination list.
10.Click Cancel to cancel the modification and return to LAN
destination list.
11.In the LAN Destination Tab, to modify a configuration,
select the row to be modified and click Modify.
12.In the Modify LAN Destination Entry page, make the nec-
essary changes and click Modify.
13.In the LAN Destination Tab, to delete a configuration,
select the slot and click Delete.
Configuring the SNMP:
1. Navigate to PEF Management.
2. Select LAN Destination tab in Configuration section.
To Next Page
Loading...
