882 Video Test Instrument User Guide (Rev A.35) 287
• DDDD are four characters for the 3D structure used. Either:
• TP for Top and Bottom
• FP for Frame Packing
• LALT for Line Alternative
• SBSF for Side-by-Side (Full)
• HHEE for Side-by-Side (Half) Horizontal sub-sampling Even left, Even right
• HHEO for Side-by-Side (Half) Horizontal sub-sampling Even left, Odd right
• HHOE for Side-by-Side (Half) Horizontal sub-sampling Odd left, Even right
• HHOO for Side-by-Side (Half) Horizontal sub-sampling Odd left, Odd right
• HQEE for Side-by-Side (Half) Quincunx matrix Even left, Even right
• HQEO for Side-by-Side (Half) Quincunx matrix Even left, Odd right
• HQOE for Side-by-Side (Half) Quincunx matrix Odd left, Even right
• HQOO for Side-by-Side (Half) Quincunx matrix Odd left, Odd right
For example: 1080HQEO would represent a 1080p format using the Side-by-Side
structure using Quincunx matrix with Even left eye and Odd right eye.
8. Specify whether you want to save the resulting 3D ready image as a bitmap (BMP)
using the checkbox provided. JPEG is not recommended.
9. Click on the Convert activation button to make the conversion and save the file in the
specified directory using the specified name.
Rendering 3D ready images
Use the following procedures to render the 3D ready images with your 88x.
1. Place a compact flash card into the 88x slot provided.
2. Transfer the 3D ready images from your PC to the compact flash card using the 88x
FTP Browser utility. On the Instrument Field side of the FTP Browser, navigate to the
To Next Page
Loading...
