318 Appendix A Command Reference
EDA<port>:GDID
Get EDID from device
Class EDID and DDC control
Description Reads an EDID from a device connected to the specified HDMI out port. Requires
firmware release 2.3.0 or higher.
Command syntax EDAport:GDID
port
1 = HDMI out port 1
2 = HDMI out port 2
Example This example reads an EDID from the device connected to HDMI out port 1.
EDA1:GDID
Related commands DIDA, DIDB, DIDE, DIDK, DIDL, TASK?, DIDP, DIDQ, DIDS, DIDU, EDA<port>:PDID,
XDID
To Next Page
Loading...
