882 Video Test Instrument User Guide (Rev A.35) 281
DIDL
eDID Load from file
Class EDID and DDC control
Description Loads an EDID from a file on the generator.
Command syntax DIDL path/filename
path/filename
The directory path and valid MS-DOS filename (8 characters minus any extension) of
the file to be loaded. If the file to be loaded is in the default path, then path/ may be
omitted.
Query syntax DIDL?
Query response The name of the file currently in the buffer.
Example This example loads the EDID from the file myedid1 in the /userdata directory.
DIDL /tffs0/library/userdata/myedid1
Related commands DIDA, DIDB, DIDE, DIDK, TASK?, DIDP, DIDQ, DIDS, DIDU, EDA<port>:GDID,
EDA<port>:PDID, XDID
To Next Page
Loading...
