282 Appendix A Command Reference
DIDN
eDID New file
Class EDID and DDC control
Description Creates a new EDID file with the name specified by filename.
Command syntax DIDN path/filename
path/filename
The directory path and valid MS-DOS filename (8 characters minus any extension) of
the file to be created. If the file is to be created in the default path, then path/ may be
omitted.
Example This example creates the file myedid1 in the /userdata directory on the generator.
DIDN /tffs0/library/userdata/myedid1
Related commands DIDA, DIDB, DIDE, DIDK, DIDL, DIDP, DIDQ, DIDS, DIDU, EDA<port>:GDID,
EDA<port>:PDID, XDID
To Next Page
Loading...
