882 Video Test Instrument User Guide (Rev A.35) 595
XISH:SRCN
Image SHift SouRCe Name
Class Image Shift
Description Establishes the image file or bitmap file that will be used for image shifting. The default file
is /Cache0/Images/Ramp. If an imageshift editing session is in progress (the ISHB
command was issued), the image source will be changed, but not applied to the hardware
until the ISHE and ISHU commands are issued. Otherwise, the command will take effect
immediately.
Command syntax XISH:SRCN path/filename
path/filename
The directory path and valid MS-DOS filename (8 characters minus any extension) of
the image or bitmap file to be used for image shifting. If the file to be used is in the
default path, then path/ may be omitted.
Query syntax XISH:SRCN?
Query response path/filename
Example
XISH:SRCN Master //Selects the Master image as the current image to
//shift
Related commands ISHA, ISHB, ISHE, ISHG, ISHK, ISHL, ISHN, ISHP, ISHQ?, ISHS, ISHU, XISH:HINC,
XISH:PATH, XISH:TINC, XISH:TTYP, XISH:VINC
To Next Page
Loading...
Need help?
General
