Quantum CHECK POINT SPARK 1500 Series - Page 224

Configuring Remote Access Users
Quantum Spark 1500, 1600 and 1800 Appliance Series R80.20.40 Locally Managed Administration Guide | 224
To configure remote access permissions for a user:
1. On the Remote Access Users page, click Add.
The New Local User window opens:
2. In the Remote Access tab, enter the:
n
User name.
n
Password.
n
Email.
n
Mobile phone number.
3. Select Remote Access permissions.
4. Click Apply.
To configure SSL VPN bookmarks:
1. Click Add > New Local User/Users Group/Active Directory Group > SSL VPN Bookmarks tab.
A new window opens.
2. Enter new bookmarks or select existing bookmarks.
Note - If you select Global bookmark, this bookmark is always shown.
3. Click Apply.
To edit a user or group:
1. Select the user or group from the list.
2. Click Edit.
3. Make the relevant changes and click Apply.
To delete a user or group:
1. Select the user or group from the list.
2. Click Delete.
3. Click OK in the confirmation message.
The user or group is deleted.