Configuring Remote Access Authentication Servers
Quantum Spark 1500, 1600 and 1800 Appliance Series R80.20.40 Locally Managed Administration Guide | 227
To edit a RADIUS server:
1. Click the IP address link of the RADIUS server you want to edit.
2. Make the necessary changes.
3. Click Apply.
The changes are updated in the RADIUS server.
To delete a RADIUS server:
Click the Remove link next to the RADIUS server you want to delete.
To configure remote access permissions for users defined in the RADIUS server:
1. Click permissions for RADIUSusers.
2. Select or clear the Enable RADIUS authentication for remote access users checkbox.
3. When selected, choose which users are given remote access permissions:
n
To allow all users defined in the RADIUS server to authenticate - Select All users defined on
RADIUS server
n
Specific user groups defined in the RADIUS server - Select For specific RADIUS groups only
and enter in the text field the names of the user groups separated by commas.
n
To allow administrators with Read-only permissions to authenticate - Select Read-only
Administrators
4. Click Apply.
To add an Active Directory domain:
1. In the Active Directory section, click New.
2. Enter this information:
n
Domain - The domain name.
n
IP address - The IP address of one of the domain controllers of your domain.
n
User name - The user must have administrator privileges to ease the configuration process
and create a user based policy using the users defined in the Active Directory.
n
Password - The user's password.
Note - You cannot use these characters in a password or shared secret: { } [ ] ` ~ | ‘
" \ Maximum number of characters: 255
n
User DN - Click Discover for automatic discovery of the DN of the object that represents that
user or enter the user DN manually.
For example: CN=John James,OU=RnD,OU=Germany,O=Europe,DC=Acme,DC=com
3. Select Use user groups from specific branch only if you want to use only part of the user database
defined in the Active Directory. Enter the branch in the Branch full DN in the text field.
4. Click Apply.
To Next Page
Loading...
Need help?
General
