Radwin 5000

RADWIN5000ConfigurationGuide Release4.9.17 4 ‐74
ConfigurationwithTelnet ManagingtheSector
TheTelnetlogonusernameisthepasswordthatyouusedtoentertheRADWINManager
(forexample,thedefault:admin).TheTelnetpasswordisthecorrespondingCommunity
string(default:netman).
Figure4‐33:Telnetsession:Loggingon
ARead‐OnlyCommunitystringallowsyoutousedisplaycommandsonlywhereasaRead‐
WriteCommunitystringallowsyoutousedisplaycommandsandexecutesetcommands.
SupportedTelnetcommandsareshowninTable 4‐4toTable 4‐6.
Table4‐4:Telnet‐DisplayCommands
Command Explanation
display inventory
DisplaysODUproductname,Name,Location,hardware
andsoftwarerevisions,uptime,MACaddress.
display management
DisplaysIP,subnet,Gateway,Trapstable
display link
DisplaysallstaticdetailsabouttheHSU
display ethernet
DisplaysPorttable(State,Statusandaction)
display ethernet_errors
DisplaysCablestatistics
display ntp
DisplaysTime,Ser verandOffset
display PM <interface:AIR,LAN1>
<interval:current,day,month>
Showstheperformancemonitortablesforeachinterface
accordingtouserdefinedmonitoringintervals
display bands
Displaysavailablebands