Chapter 7
96 Envizio Pro™ and Envizio Pro II® Installation and Operation Manual
Amazone Amatron+
The field computer may be used in conjunction with the Amazone Amatron+ console for guidance and
monitoring of product applications using an existing Amazone system. Refer to Appendix J, Serial Console
Interfaces, for additional information.
Yield Monitor
Select ‘Yield Monitor’ if the field computer will be interfacing with an optional Raven SmartYield system to
monitor and log yield and moisture data during harvest operations. Refer to the SmartYield Calibration &
Operation Manual for additional information.
SmartYield Pro
Select ‘SmartYield Pro’ if the field computer will be interfacing with an optional Raven SmartYield Pro CANbus
yield monitoring system to monitor and log yield and moisture data during harvest operations. Refer to the
SmartYield Pro Calibration & Operation Manual for additional information.
OmniSeed
Select the OmniSeed option if the field computer will be interfacing with the optional Raven OmniSeed system
to provide seed rate control for an air seeder system.
Note: A registration code is required to interface with the Raven OmniSeed system. If attempting to
select OmniSeed during the initial start up, select ‘None’ for the product control option to complete
the wizard.
Contact a local Raven dealer for more information and to purchase the required activation key.
Refer to the Special Features Registration section on page 138 for instructions on entering the
OmniSeed activation key before setting up the air seeder control system.
To Next Page
Loading...
