To Next Page

To Previous Page

RED RAVEN OPERATION GUIDE

955-0127_V6.3, REV-E | 82

APPLE PRORES INFORMATION

By default, the camera records all videos and stills in the REDCODE RAW file format. You also have the option

to record Apple ProRes files. This section provides general information about recording Apple ProRes files with

the camera:

NOTE: Each camera offers different Apple ProRes codecs, and different frame rates for those codecs. For more

information, go to “Technical Specifications” on page 159.

 The camera cannot record Apple ProRes when Pre-Record is enabled.

 The camera can record Apple ProRes only when either of the following recording modes is enabled:

‒ Continuous Record

‒ Motion + Stills

 Recording to REDCODE RAW + QuickTime is not supported when the format is 4K FF.

 If HDRx

is enabled, only the selected monitor track is recorded to the QuickTime files. For more information,

go to “HDRX Menu” on page 115.

 RED recommends performing a Secure Format before recording Apple ProRes. For more information, see

the DSMC Media Operation Guide, available at www.red.com/downloads.

 QuickTime files have the same metadata that is in the REDCODE RAW files. The metadata is per clip, and

not per frame. At this time, there is no tool for extracting that metadata from the QuickTime files.

 You can select any Resolution in the Format menu. When recording Apple ProRes, the camera scales that

format to the Resolution (2K) selected in the Codec menu. The field of view is maintained in the QuickTime

file; the image is not cropped. For more information on setting the Format, go to “Format” on page 76.

 For more information about Apple ProRes, including the data rates for each codec, see the Apple Support

site at https://support.apple.com/en-us/HT202410.

Questions and Answers:

Need help?

Do you have a question about the RED Raven and is the answer not in the manual?

RED Raven Specifications

General