Reliable Controls SS-P - Page 29

20
 2004 – 2014 Reliable Controls
®
Corporation. All rights reserved.
Table 3 lists the model numbers of all standard SS models available to order. If a model
number with a specific combination of options is not listed, check with the ordering desk
for availability. Minimum order quantities and longer lead times may apply.
TABLE 3: STANDARD SS MODELS AVAILABLE TO ORDER
Model SMART-Sensor Description
SS-CO2-H-UD
0-2000 ppm
CO
2
sensor, ± 2% humidity sensor, setpoint up and
down buttons
SS-CO2-OC-UD
0-2000 ppm
CO
2
sensor, PIR Motion Sensor, setpoint up and
down buttons
SS-CO2-UD
0-2000 ppm
CO
2
sensor, setpoint up and down buttons
SS-H-O-S ± 2% humidity sensor, override Button, setpoint slider
SS-H-S ± 2% humidity sensor, setpoint slider
SS-H-UD ± 2% humidity sensor, setpoint up and down buttons
SS-IO-UD 2 dry contact Inputs, and 2 TRIAC Outputs, setpoint up and down
buttons
SS-O Override Button
SS-OC-UD PIR Motion Sensor, setpoint up and down buttons
SS-O-S Override Button, setpoint slider
SS-S Setpoint slider
SS-UD Setpoint up and down buttons
SS-P Stainless wall plate temp sensor
SS-P-O Stainless wall plate temp sensor, and override button
SS-DUCT-4-PB Plastic box duct mount temp sensor with 4" probe length
SS-DUCT-4-GD Galvanized metal duct mount temp sensor with 4" probe length
SS-DUCT-IO-4-PB Plastic box duct mount temp sensor with 4" probe length, 2 dry
contact inputs, and 2 solid-state relay (SSR) outputs
SS-DUCT-IO-4-GD Galvanized metal duct mount temp sensor with 4" probe length, 2
dry contact inputs, and 2 SSR outputs
SS-DUCT-8-PB Plastic box duct mount temp sensor with 8" probe length
SS-DUCT-8-GD Galvanized metal duct mount temp sensor with 8" probe length
SS-DUCT-IO-8-PB Plastic box duct mount temp sensor with 8" probe length, 2 dry
contact inputs, and 2 SSR outputs
SS-DUCT-IO-8-GD Galvanized metal duct mount temp sensor with 8" probe length, 2
dry contact inputs, and 2 SSR outputs
SS-DUCT-12-PB Plastic box duct mount temp sensor with 12" probe length
SS-DUCT-12-GD Galvanized metal duct mount temp sensor with 12" probe length
SS-DUCT-IO-12-PB Plastic box duct mount temp sensor with 12" probe length, 2 dry
contact inputs, and 2 SSR outputs
SS-DUCT-IO-12-GD Galvanized metal duct mount temp sensor with 12" probe length,
2 dry contact inputs, and 2 SSR outputs
SS-DUCT-18-PB Plastic box duct mount temp sensor with 18" probe length