Renault OPEN R LINK - Phone; Pair and Connect a Phone; Pairing, Unpairing a Telephone; Introduction

PAIR AND CONNECT A PHONE
4
Phone - 65
Pairing, unpairing a telephone
For safety reasons, carry
out these operations
when the vehicle is
stationary.
Introduction
This function enables your phone to be
paired with the multimedia system.
You can access the "Pair new device"
menu from:
– the "Phone" World, press
"Connect usingBluetooth®" (if no
phones are paired);
– the "Applications" World ,
then "Devices Manager";
– The "Vehicle" world ,
"Settings", then "Bluetooth®";
– the "Phone" World , press the
"Settings" icon , then "Devices
Manager" (if a phone is already
paired);
– the "Audio" World press
"Connect usingBluetooth®" (if no
phones are paired);
– the notification centre, the "Settings"
icon , then "Bluetooth®".
Note: if no telephone is connected to
the multimedia system, some menus
will be disactivated.
Pairing your telephone will enable the
multimedia system to access your
telephone functions. No copies of your
contacts or personal data will be saved
in the multimedia system.
To enable the multimedia system to
manage phones equipped with "dual
SIM", configure your phone to use a
defaultSIM. Please see your phone
user manual.
Note:
– before pairing, ensure that your
phone's Bluetooth® is activated and
set its status to "visible";
– the vehicle must be stationary in
order for a phone to be paired.
For a list of compatible
telephones, consult the
https://renault-
connect.renault.com site.
Pairing a phone
To use your hands-free system, pair
your Bluetooth® phone with the
multimedia system.
For more information about activating
the visible status of your phone, please
refer to your telephone user manual.
Your phone may ask for authorisation
to share your contacts, call logs,
messages, etc. Accept sharing if you
wish to access this information on the
multimedia system.
From the "Phone" World , then
"Connect usingBluetooth®" or from the
"Applications" World , then
"Devices Manager" on your multimedia
system:
– a message is displayed on the
screen offering to pair a phone;
– press "Pair new device". The
multimedia system searches for
nearby telephones that have
Bluetooth® activated and are visible;
– select your phone from the list of
suggestions or select the multimedia
system from your phone.
A message appears on the multimedia
system screen as well as on the
phone, inviting you to accept the
pairing request if the proposed code is