PARKING AIDS
6
Vehicle - 95
– « Front »
1
;
– « Side »
2
.
« Sound »
3
Press "Sound"
3
to activate or
deactivate the Park Assist sound
warnings.
The following settings can be modified:
– "Sound type"
4
: select the type of
audible warning among those offered;
– "Volume": adjust the obstacle
detection warning volume using
the "Volume" bar
5
.
« Rear Cross Parking Alert »
6
The "Rear Cross Parking Alert"
function
6
detects obstacles as they
approach the side of the vehicle from
behind.
It is activated when reverse gear is
engaged and the vehicle is stationary
or moving at a low speed.
You will be notified of approaching
obstacles by a continuous beep as
well as a display on the multimedia
screen and a light signal on the rear
view mirror.
Note: stationary obstacles are not
detected.
For more information on the "Rear
Cross Parking Alert" function, please
see the section on "Rear Cross
Parking Alert" in your vehicle user
manual.
« Rear Active Emergency
Braking »
7
When the reverse gear is engaged, the
"Rear Active Emergency Braking"
7
detects stationary obstacles behind
your vehicle.
For more information on the "Rear
Active Emergency Braking" function,
please see the section on "Rear Active
Emergency Braking" in your vehicle
user manual.
« Occupant Safe Exit »
8
The "Occupant Safe Exit" warning
8
detects a potential hazard and warns
the driver and/or passenger(s) if they
open a door while the vehicle is
stationary.
This is activated when the vehicle is
parked.
If an obstacle approaches the vehicle,
a warning will be displayed on the
instrument panel, a light signal will
appear on the door mirrors and inside
of the doors and a beep will sound.
Note: stationary obstacles and
pedestrians are not detected.
For more information on the "Occupant
Safe Exit" function, please see the
section on "Occupant Safe Exit" in
your vehicle user manual.
"Hands-free Park Assist" menu
The "Hands-free Park Assist" function
assists you with parking manoeuvres
by taking control of the steering wheel,
the brakes, the engine and the gear
lever.
Throughout the manoeuvre, you must
put pressure on the accelerator pedal
(to keep the function working) and take
your hands off the steering wheel.
You can take back control of the
vehicle at any time by:
– turning the steering wheel;
– releasing the accelerator pedal;
– or by pressing the brake pedal.
You can access the "Hands-free Park
Assist" menu from:
– World "Vehicle" , select the
"Driving assistance" menu, then tab
"Parking"
C
;
– the "Hands-free Park Assist" widget
by pressing "Open" (to configure, see
the "Add and manage widgets"
section);
– the "Favourites" button on the
steering wheel (to configure, see the
"User settings" section);
– the "Hands-free Park Assist"
shortcut the in 360° camera view (for
To Next Page
Loading...
