9 March 2004 PAPER TRAY UNIT HEATER
1-19
Installation
31. Pull the excess length of the heater's
harness out the opening at the rear
[A].
NOTE: Be sure that the harness
passes on the side of the
grounding plate [B] at the
bottom of the opening. (The
front of the grounding plate
must remain clear.)
32. Arrange the excess harness length so
that it sits beneath the FCU cover
plate.
33. Attach the caution decals to the
locations shown in the illustration.
34. Reassemble the copier.
35. Plug in the power cord, and check the
operations.
B046I522.WMF
B046I523.WMF
[A]
[B]
To Next Page
Loading...
