Stacking for Booklet Stapling
SM 53 B793
B793
Booklet
Finisher
2.9.2 8.5 X 14 (LEGAL) OR SHORTER
At the start of the set, the upper retraction motor [A] turns on, and stopper S [B] moves
down into position to catch the paper
. The upper retraction motor also moves the upper
clamp roller [C] into contact with the stack
.
When the stack is complete, stopper S moves away [D], and the machine feeds the stack to
the correct position for stapling. To do this, the upper clamp roller motor [E] rotates the
upper clamp roller.
To Next Page
Loading...
