Ricoh Aficio MP C3001 Service Manual

Anti-Condensation Heater Type A
SM 2-97 D086/D087
Installation
8. Connect the harness [I] to the connector [J] of the tray heater.
9. Route the harness [I] as shown and clamp it with four clamps (
x 4).
10. Connect the harness [I] to the connector [K] of the mainframe.
11. Reassemble the mainframe and optional paper feed unit.
12. Attach the on/standby decal [L] to the right-hand side of the main power switch.
For Installing the Tray Heater in D538
1. Remove the rear cover of the mainframe ( step 1 in For Installing the Tray Heater in
D537).
2. Pull out the LCT drawer.
 If the right tray comes out with the left tray, push the right tray into the LCT.
3. Left tray [A] ( x 2)

Ricoh Aficio MP C3001 Specifications

General

Print Technology	Laser
Print Resolution	1200 x 1200 dpi
Scan Resolution	600 x 600 dpi
Paper Capacity	1, 200 sheets
Duplex Printing	Yes
Functions	Print, Copy, Scan, Fax
Copy Resolution	600 x 600 dpi
Paper Capacity (Maximum)	4, 400 sheets
Memory (Standard)	1 GB
Hard Drive	160 GB
Fax Speed	33.6 kbps
Print Speed	30 ppm
Connectivity	USB, Ethernet
Copy Speed	30 ppm (mono) / 30 ppm (color)
Paper Size	A3, A4, A5, B4, B5
Memory (Maximum)	1.5 GB
Max Paper Size	A3
Operating System Compatibility	Windows, Mac