Ricoh Aficio MP C3001 Service Manual

Controller Options
D086/D087 2-104 SM
2.26.2 SD CARD APPLI MOVE
Overview
The service program "SD Card Appli Move" (SP5-873) lets you move application programs
from one SD card to another SD card.
If more than one application is required, the applications must be moved to one SD card with
SP5873-1 (PostScript 3, Security Application, PictBridge, IPDS unit, PDF Direct, etc.).
Be very careful when you do the SD Card Appli Move procedure:
 The data necessary for authentication is transferred with the application program from an
SD card to another SD card. Authentication fails if you try to use the SD card after you
move the application program from one card to another card.
 Do not use the SD card if it has been used before for other purposes. Normal operation is
not guaranteed when such an SD card is used.
 Remove the cover [A] (
x 2), and then keep the SD card in the place [B] after you
move the application program from one card to another card. This is done for the
following reasons:
 The SD card can be the only proof that the user is licensed to use the application
program.
 You may need to check the SD card and its data to solve a problem in the future.
 You cannot move the PostScript or PDF Direct application to another SD card. You have
to move the other application (PictBridge, Security Applications, IPDS unit) to the SD
card that stores the PostScript or PDF Direct application.

Ricoh Aficio MP C3001 Specifications

General

Print Technology	Laser
Print Resolution	1200 x 1200 dpi
Scan Resolution	600 x 600 dpi
Paper Capacity	1, 200 sheets
Duplex Printing	Yes
Functions	Print, Copy, Scan, Fax
Copy Resolution	600 x 600 dpi
Paper Capacity (Maximum)	4, 400 sheets
Memory (Standard)	1 GB
Hard Drive	160 GB
Fax Speed	33.6 kbps
Print Speed	30 ppm
Connectivity	USB, Ethernet
Copy Speed	30 ppm (mono) / 30 ppm (color)
Paper Size	A3, A4, A5, B4, B5
Memory (Maximum)	1.5 GB
Max Paper Size	A3
Operating System Compatibility	Windows, Mac