Electrical Components
SM 5 D542
Side Tray
Type C5501
D542
1.2.3 SIDE TRAY RELAY SENSOR
1. Sub and main output trays ( Sub and Main Output Trays)
2. Tray left front and rear covers (
Tray Left Front and Rear Covers)
3. Side tray (
Installation Procedure in the base copier manual)
4. Open the paper tray [A].
5. Remove the ground cable [B] (
x 1).
6. Remove the paper tray [A].
7. Turn over the side tray.
8. Side tray relay sensor [A] ( x 1, hooks)
9. Turn over the side tray, and then remove the side tray relay sensor.
To Next Page
Loading...
