Ricoh Aficio MP C3001 Service Manual

Controller Options
SM 2-103 D086/D087
Installation
2.26 CONTROLLER OPTIONS
2.26.1 OVERVIEW
This machine has I/F card slots for optional I/F connections and SD card slots applications.
After you install an option, check that the machine can recognize it (see "Check All
Connections" at the end of this section).
I/F Card Slots
 Slot A is used for one of the optional I/F connections (only one can be installed):
IEEE1284, IEEE802.11a/g (Wireless LAN), Bluetooth or Remote Communication Gate.
 Slot B is used for the File Format Converter or Remote Communication Gate.
 Slot C is used for Gigabit Ethernet.
SD Card Slots
 Slot 1 is already occupied by the Security SD Card by factory default, and is also used for
optional applications (e.g.: PostScript 3, PictBridge, IPDS unit, PDF direct, etc).
 Slot 2 is used for installing the Browser Unit, VM card or for service only (for example,
updating the firmware).

Ricoh Aficio MP C3001 Specifications

General

Print Technology	Laser
Print Resolution	1200 x 1200 dpi
Scan Resolution	600 x 600 dpi
Paper Capacity	1, 200 sheets
Duplex Printing	Yes
Functions	Print, Copy, Scan, Fax
Copy Resolution	600 x 600 dpi
Paper Capacity (Maximum)	4, 400 sheets
Memory (Standard)	1 GB
Hard Drive	160 GB
Fax Speed	33.6 kbps
Print Speed	30 ppm
Connectivity	USB, Ethernet
Copy Speed	30 ppm (mono) / 30 ppm (color)
Paper Size	A3, A4, A5, B4, B5
Memory (Maximum)	1.5 GB
Max Paper Size	A3
Operating System Compatibility	Windows, Mac