Bit Switches
SM 105 D545
Fax option
Type C5501
D545
Communication Switch 0B (SP No. 1-104-012)
No Function Comments
0
Use of Economy Transmission
during a Transfer operation to
end receivers
0: Disabled, 1: Enabled
These bits determine whether the machine
uses the Economy Transmission feature when
it is carrying out a Transfer operation as a
Transfer Station.
1
Use of Economy Transmission
during a Transfer operation to
the Next Transfer Stations
0: Disabled, 1: Enabled
2
Use of Label Insertion for the
End Receivers in a Transfer
operation
0: Disabled, 1: Enabled
This bit determines whether the machine uses
the Label Insertion feature when it is carrying
out a Transfer operation as a Transfer Station.
3
Conditions required for Transfer
Result Report transmission
0: Always transmitted
1: Only transmitted if there was
an error
0: When acting as a Transfer Station, the
machine will always send a Transfer Result
Report back to the Requesting Station after
completing the Transfer Request, even if there
were no problems.
1: The machine will only send back a Transfer
Result Report if there were errors during
communication, meaning one or more of the
End Receivers could not be contacted.
4
Printout of the message when
acting as a Transfer Station
0: Disabled, 1: Enabled
When the machine is acting as a Transfer
Station, this bit determines whether the
machine prints the fax message coming in
from the Requesting Terminal.
5
Action when there is no fax
number in the programmed
Quick/Speed dials which meets
the requesting terminal's own
fax number
0: Transfer is disabled
After the machine receives a transfer request,
the machine compares the last N digits of the
requesting terminal's own fax number with all
the Quick/Speed dials programmed in the
machine. (N is the number programmed in
communication switch 0C.)
To Next Page
Loading...
