Main SP Tables-2
D086/D087 5-42 SM
015 PCU:Thick 2&FINE *ENG
[–100 to 100 / -28 / 1 –V/step]
016 HVP:Plain *ENG
[–100 to 100 / 20 / 1 –V/step]
017 HVP:Thick 1 *ENG
[–100 to 100 / 20 / 1 –V/step]
018 HVP: Thick 2&FINE *ENG
[–100 to 100 / 29 / 1 –V/step]
2006
[Charge AC Voltage] Charge Roller AC Voltage Adjustment
(Paper Type, Process Speed, Color)
Paper Type –> Plain, Thick 1, Thick 2
Plain: High speed, Thick 1: Middle speed, Thick 2&FINE: Low speed
Adjusts the AC component of the charge roller bias in the various print modes.
Charge bias (AC component) is adjusted by environment correction
(SP2-007-xxx to SP2-011-xxx). These SPs are activated only when SP2-012-1
is set to "1: manual control".
001 Plain: Bk *ENG
[0 to 3 / 1.9 / 0.01 KV/step]
002 Plain: M *ENG
[0 to 3 / 2.2 / 0.01 KV/step]
003 Plain: C *ENG
[0 to 3 / 2.2 / 0.01 KV/step]
004 Plain: Y *ENG
[0 to 3 / 2.2 / 0.01 KV/step]
005 Thick 1: Bk *ENG
[0 to 3 / 1.9 / 0.01 KV/step]
006 Thick 1: M *ENG
[0 to 3 / 2.2 / 0.01 KV/step]
007 Thick 1: C *ENG
[0 to 3 / 2.2 / 0.01 KV/step]
008 Thick 1: Y *ENG
[0 to 3 / 2.2 / 0.01 KV/step]
009 Thick 2&FINE: Bk *ENG
[0 to 3 / 1.9 / 0.01 KV/step]
010 Thick 2&FINE: M *ENG
[0 to 3 / 2.2 / 0.01 KV/step]
011 Thick 2&FINE: C *ENG
[0 to 3 / 2.2 / 0.01 KV/step]
012 Thick 2&FINE: Y *ENG
[0 to 3 / 2.2 / 0.01 KV/step]
To Next Page
Loading...
