Message Causes Solutions
"86: Error" Parameters of the control
code are invalid.
Check the print settings.
"91: Error" Printing was canceled by
the auto job cancel function
due to a command error.
Check that the data is valid.
"92: Error" Printing was canceled
because [Job Reset] or the
[Stop] key was selected on
the machine's control panel.
Perform the print operation again if
necessary.
"98: Error" The machine could not
access Hard disk correctly.
Turn off the main power switch, and
then back on again. If the message
appears frequently, contact your service
representative.
"Address Book is currently
in use by another function.
Authentication has failed."
The machine currently
cannot perform
authentication because the
Address Book is being used
by another function.
Wait a while, and then retry the
operation.
"An error occurred while
processing an Unauthorized
Copy Prevention job. The
job was cancelled."
You tried to store a file in
the Document Server when
the [Unauthorized Copy
Prevention] was specified.
On the printer driver, select a job type
other than [Document Server] in the "Job
Type:" or deselect [Unauthorized Copy
Prevention].
"An error occurred while
processing an Unauthorized
Copy Prevention job. The
job was cancelled."
The [Enter User Text:] field
on the [Unauthorized Copy
Prevention for Pattern
Details] screen is blank.
On the printer driver's [Detailed
Settings] tab, click [Effects] in the
"Menu:". Select [Unauthorized Copy
Prevention], and then click [Details] to
display [Unauthorized Copy Prevention
for Pattern Details]. Enter text in [Enter
User Text:].
"An error occurred while
processing an Unauthorized
Copy Prevention job. The
job was cancelled."
The resolution is set to a
value less than 600 dpi
when [Unauthorized Copy
Prevention] is specified.
On the printer driver, set the resolution
to 600 dpi or higher, or deselect
[Unauthorized Copy Prevention].
When Messages Are Displayed on the Control Panel
203
To Next Page
Loading...
Need help?
General
