Errata
This supplement provides notes and corrections for the manuals provided with this machine.
Topic Error Corrections
Fax > Changing/Conrming Com-
munication Information > Printing a
File Received with Memory Lock
If Memory Lock Reception and re-
ceived document storage are both
set to on, Memory Lock Reception
is unavailable and received docu-
ments become stored documents.
Settings for both Memory Lock
Reception and received document
storage cannot be congured at
the same time.
Fax > Facsimile Features > Initial
Settings > SIP Settings
Step 5
To use SIP digest authentication,
press [Set], and then enter the
password.
Press [Enter], enter the password
using up to 128 characters, and
then press [OK].
Re-enter the password after the
message Conrm Password
appears on the screen, and then
press [OK].
Step 5
To use SIP digest authentication,
press [Set], and then enter the
user name and the password.
Press [Change] under [User
Name], enter the user name, and
then press [OK].
Press [Enter] under [Password],
enter the password using up to 128
characters, and then press [OK].
Re-enter the password after the
message Conrm Password
appears on the screen, and then
press [OK].
Print > Printing Stored Documents
> Storing Documents in the Hard
Disk Drive and Printing them >
Hold Print > Changing the print
time of a Hold Print le
You can specify the time in 24-hour
format. To cancel the print time,
press [Cancel].
For users mainly in Europe and
Asia:
You can specify the time in 24-hour
format.
For users mainly in North America:
You can specify the time in 12-hour
format.
Connecting the Machine/ Sys-
tem Settings > System Settings >
Administrator Tools
Print Export Result Log
Print Import Result Log
Those two functions are not avail-
able.
Connecting the Machine/ Sys-
tem Settings > Connecting the
Machine > Connecting to the Inter-
face > Connecting to the Gigabit
Ethernet Interface
If the machine enters the Energy
Saver mode, both LEDs may go
off.
This issue is not applied to this
machine.
Security Guide > 4. Prevent-
ing Leakage of Information from
Machines > Encrypting Data on
the Hard Disk > Time required for
encryption
Setting: All Data
Data to be kept: Both the data to
be kept and data not kept when
[File System Data Only] is speci-
ed
Data to be initialized: None
Required time:
Types 1 & 2: Approx. 8 hours
Required time:
Types 1 & 2: Approx. 3 hours 30
minutes
To Next Page
Loading...
Need help?
General
