Topic Error Corrections
Security Guide > 7. Managing
the Machine > Managing Device
Information > Importing Device
Information
Step 7
Specify the encryption key if the
settings le was encrypted during
export.
Step 7
Specify the encryption key that was
created when the le was exported.
(The encryption key must be
always congured)
Security Guide > 7. Managing
the Machine > Managing Device
Information > Periodically Import-
ing Device Information
Step 6
When the device setting informa-
tion le to be imported is encrypt-
ed, congure an encryption key.
Step 6
Specify an encryption key.
(The encryption key must be
always congured)
Security Guide > 9.Checking
Operation Privileges > System Set-
tings > Administrator Tools
Print Import Result Log
Print Export Result Log
Those functions are not available.
Topic Additional information
Fax > Changing/Conrm-
ing Communication Infor-
mation > Checking Auto
Output Mode Setting >
Types of the Output Mode
for Receiving Documents
> The applied output mode
when Output Mode Switch
Timer is enabled
If you specify automatic print settings for a report and a parameter other than •
[Print] is set to [Output Mode] in [General Setting] under [Output Mode Switch
Timer], the report may not print. If you specify any restrictions not for automatic
report printing but for fax reception, set [Off] to [General Setting] and specify a
parameter other than [Print] for [Output Mode] per line.
If a report does not print automatically, the following may occur. If this is the •
case, check the [Output Mode Switch Timer] setting and cancel print restrictions,
or specify [Print Standby to Print Files] so that a report can be printed manually.
The amount of free memory space becomes less than 100%, or the number of -
received documents reaches the maximum.
If the number of transmission logs reaches the maximum, further communica-
tion may not be possible depending on the settings.
Received documents cannot be deleted and Reception File Erased Report can- -
not be printed even though “On” is set with the User Parameter (switch 10, bit 7).
The documents cannot be printed depending on the settings even though “Off”
is specied for received documents.
Personal Boxes, Information Boxes, or Transfer Boxes cannot be modied or -
deleted.
Fax > Changing/Con-
rming Communication
Information > Information
Boxes > Information Boxes
If a parameter other than [Print] is set to [Output Mode] in [General Setting]
under [Output Mode Switch Timer] in [Reception File Settings], document
registration in or deletion from Information Boxes may not be possible. If this is
the case, check the [Output Mode Switch Timer] setting.
Security Guide > 5. En-
hanced Network Security
> Conguring SSL/TLS >
Enabling SSL/TLS
If only TLS1.2 and TLS1.1 are enabled, Integration Server authentication can-
not be performed.
Security Guide > 7.
Managing the Machine >
Managing Device Informa-
tion
The device information of each machine can be exported or imported as its •
device setting information. This le can be used for backups.
The device congurations of the device setting information le to be •
imported from the control panel must be the same as those of the device
setting information le that is exported. If not, the device setting information
le cannot be imported.
If the device congurations of the device setting information le are changed, •
update the le.
If multiple devices have the same device conguration, import the device •
setting le so that the device settings are the same.
To Next Page
Loading...
Need help?
General
