G147 5-32 SM
Digits Meaning
1st, 2nd
Month. 4: April, 10: October (for months 1 to 9, the first digit of 0
cannot be input, so the eight-digit setting for 002 or 003 becomes
a seven-digit setting)
3rd Day of the week. 0: Sunday, 1: Monday
4th
The number of the week for the day selected at the 3rd digit. If “0”
is selected for “Sunday”, for example, and the selected Sunday is
the start of the 2nd week, then input a “2” for this digit.
5th, 6th
The time when the change occurs (24-hour as hex code).
Example: 00:00 (Midnight) = 00, 01:00 (1 a.m.) = 01, and so on.
7th The number of hours to change the time. 1 hour: 1
8th
If the time change is not a whole number (1.5 hours for example),
digit 8should be 3 (30 minutes).
001 Setting
Enables/disables the settings for 002 and 003.
[0~1/1]
0: Disable
1: Enable
002
Rule Set
(Start)
The start of summer time.
004
Rule Set
(End)
The end of summer time.
UCodeCtrClr User Code Count Clear
5404
Clears the counts for the user codes assigned by the key operator to restrict the
use of the machine. Press [#Enter] to clear.
5501 PM Alarm
001 PM Alarm Level [0~9999 / 0 / 1 step]
To Next Page
Loading...
