Common Procedures
J012/J013/J014 3-12 SM
1. Press the lock release [1] and remove the cover.
2. Pull the ink collector unit [2] out of the machine.
3. If you are replacing the ink collector tank, insert the new tank.
4. Reattach the cover.
5. Do SP5003 to reset the ink collector tank counter.
6. Discard the used ink collector tank.
Obey the local laws and regulations regarding disposal of items such as the full
ink collector tank.
Never attempt to clean a full ink collector tank and use it again.
To Next Page
Loading...
