Ricoh J012 - Duplexer Set Switch

Duplex Unit
SM 6-73 J012/J013/J014
Detailed
Description
6.11.4 DUPLEXER SET SWITCH
The Duplex Unit set switch [1], a micro-switch in the printer, detects the presence of the
Duplex Unit.
This occurs when the Duplex Unit is installed correctly on the back of the printer:
The unit the set lever [2] depresses the Duplex Unit set switch. Then it turns it on.
The printer signals an error (Paper Jam – Type 1) at these times:
 The Duplex Unit is not installed correctly
 The set lever has not fully depressed the Duplex Unit set switch
 The duplex unit is not an option for this printer.
 The duplex unit must be installed at all times in order for the printer to operated
properly.
CÓPIA NÃO CONTROLADA
CÓPIA NÃO CONTROLADA