Motors
SM 3-51 J012/J013/J014
Replacement
Adjustment
3.7.5 FRONT FAN
Preparation
Remove platen or ADF. ( 3.2.4, 3.2.5)
Raise the scanner unit to full upright. ( 3.2.7)
Remove: (1) paper cassette, (2) paper output tray, (3) right front cover, (4) right cover.
( 3.2.8, 3.2.9, 3.2.10)
1. Pull the fan connector harness [1] out of its L-clamp.
2. Disconnect the fan harness connector [2] (x1).
3. Remove fan bracket screws [3] and [4] then remove the fan (x2).
To Next Page
Loading...
