SP Mode Service Tables
J012/J013/J014 5-62 SM
5.3.3 GROUP 2000
Set Threshold for Near-Full Alert
2000 TH:WASTE:R:SNS Ink Collector Unit Sensor
Use this SP to set the threshold value to trigger near full alert for the Ink Collector
tank sensor.
[0 to 1023/0/1/---]
2001 TH:WASTE:R:SOFT Software Count : Ink Collector Unit Near Full
Use this SP to set the threshold value to trigger the near-full alert for the Ink
Collector tank sensor.
[0 to 4294967295/0/1/nl]
2002 TH:WASTE:R:FULL Software Count : Ink Collector Unit Full Alert
Use this SP to set the threshold value of the firmware counter to trigger the full
alert for the right Ink Collector tank sensor.
[0 to 4294967295/0/1/nl]
2003 TH:WASTE:L:NEAR Software Count : Left Ink Collector Unit Near Full
Use this SP to set the threshold value of the firmware counter to trigger the
near-full alert for the left Ink Collector tank sensor.
[0 to 4294967295/0/1/nl]
2004 TH:WASTE:L:FULL Software Count: Left Ink Collector Unit Full Alert
Use this SP to set the threshold value of the firmware counter to trigger the full
alert for the left Ink Collector tank sensor.
[0 to 4294967295/0/1/nl]
To Next Page
Loading...
