Ricoh J012 - Paper Feed; Carriage

SP Mode Service Tables
SM 5-49 J012/J013/J014
Service
Tables
Paper Feed
1014 FDLEN:F Adjust Amount of Paper Feed (FA)
Do this SP adjust the amount of line feed for 1 scan line. Do this setting only if the
line feed amount cannot be adjusted on the user menu of the printer operation
panel with "Adj. Paper Feed.”
[-1000000 to +1000000/FA/1 μm]
1015 FDLEN:OFFSET Adjust Amount of LF Offset in Sub Scan Direction
Use this SP to set the amount of line feed before the print head begins its 2nd
pass during bi-directional printing. Do this SP when it is necessary to correct color
offset that occurs during bi-directional printing.
[-128 to +128/FA/1/Vertical Encoded Pulse Count]
Carriage
1016 ADJ:SIDEBOARD Adjust Sideboard (Carriage Home Position)
Use this SP to set the reference position for installation of the right plate. Do this
SP to correct the alignment of the capping position with the carriage.
[-128 to +128/FA/1/0.1 mm]
CÓPIA NÃO CONTROLADA
CÓPIA NÃO CONTROLADA