Important Information
SM 1-35 J012/J013/J014
Installation
1.5 IMPORTANT INFORMATION
Make sure that the customer understands the following points about moving, storing, and
using the machine.
1.5.1 CHECKLIST BEFORE MOVING THE MACHINE
Turn the machine off. Disconnect the power cord.
Never disconnect the power cord without first turning off the machine.
To lift the machine, grip it at the center of each side by the hand recesses provided.
Machine Weight
J012 20 kg (44 lb.)
J013 23 kg (50.7 lb.)
J014 23.5 kg (51.8 lb.)
Never grip the Duplex Unit on the back of the machine.
Make sure the covers and trays are closed. Secure them with tape. Attach shipping tape
to the same areas you removed it from at the time of installation.
Disconnect the power cord. Tape the power cord to the back of the machine.
Remove all paper in the feed trays.
Do a test print to confirm that the machine operates correctly after you move it to
another location. Do the print head cleaning procedures with the machine driver, if
necessary.
The print cartridges should remain in the machine. It is not necessary to remove them
before transporting the machine.
To avoid ink spillage, always hold the machine level when you move it. Never tilt the
machine more than 45° from horizontal. Work carefully to avoid dropping it or
colliding with other objects in the work area.
To Next Page
Loading...
