Cleaning Procedures
SM 3-65 J012/J013/J014
Replacement
Adjustment
3.10.5 FRICTION PAD CLEANING
The friction pad is located on the bottom of the machine.
To avoid ink spillage never set the machine on its side or turn it upside down to
remove the friction pad.
1. Position the machine [1] with the front and back supported by two tables as shown
above. (The white line shows the position of the friction pad under the machine.
2. Under the machine remove the screw [1] and remove the friction pad.
3. Use a damp cloth to clean the surface of the friction pad [2].
To Next Page
Loading...
