Installation Procedure
J012/J013/J014 1-14 SM
No. Item Qty
18 Fax Operation Panel Decal (J013/J014 only) 1
19 Rating Nameplate 1
20 Display Initial Language 1
21 WEEE Decal 1
22 CD-ROM Page Manager 1
23 Contact for Page Manager Support
*1 Nashuatec, Rexrotary, Gestetner
*2 Starter Print cartridges
J737 Print Cartridge GC 21Y
J736 Print Cartridge GC 21M
J735 Print Cartridge GC 21C
J734 Print Cartridge GC 21K
*3 The power cord is attached to the NA model. The power cord is provided as a separate
item for the EU model only.
1.3.3 REMOVE THE SHIPPING MATERIAL
Before you do any of the procedures in this manual, make sure the printer is turned
off and unplugged from the power source. Do not turn the printer on until you
instructed to do so.
1. Remove the protective covering.
2. Remove the plastic bag.
To Next Page
Loading...
