Motors
SM 3-47 J012/J013/J014
Replacement
Adjustment
3.7.2 VERTICAL MOTOR
Preparation:
Remove platen or ADF. ( 3.2.4, 3.2.5)
Raise the scanner unit to full upright. ( 3.2.7)
Remove: (1) paper cassette, (2) paper output tray, (3) left cover ( 3.2.8, 3.2.12)
1. Release harness [1] (=x1)
2. Remove spring [2]. (x1).
3. Remove the motor screws [3], [4] (x2).
4. Remove the motor plate screws [5], [6] (x2).
5. Disconnect the timing belt [7].
6. Pull out the motor [8] and disconnect it (x1).
To Next Page
Loading...
