Installation Procedure
J012/J013/J014 1-24 SM
You might hear a clicking sound while the ink tanks are filling. This is
normal and the noise will stop after a few minutes.
This printer has no mechanism to automatically detect tray paper size and
type.
The paper size and type must be set with the menu on the operation panel.
Set the paper type setting for the paper loaded in the printer cassette (A4,
Plain or LT Plain, for example) before making copies or prints.
Select Country and Language
The default settings for "Country" and "Language" are "USA" and "English.”
1. [Menu]> "System Settings?"> [Yes]>"1 Auto Reset Time?.”
2. [#] or [%] > "7 Country?"> [Yes]> "USA?"
3. [#] or [%] > Select country name> [Yes]> "System Settings"> [Yes]> "1 Auto Reset
Time?"
4. [#] or [%] > "4 Language"> [Yes]> "English?"
5. [#] or [%] > Select the language> [Yes]
Please Re-start
Power Off On
6. Cycle the machine off/on to set the language for the menu displays.
Set Paper Type and Size for Tray 1
1. [Menu]> "System Settings?"
2. [#] or [%] > "Tray Paper Setting?"> [Yes]> "Tray1?"
3. [Yes]> "Paper Type?"> [Yes]> "Plain Paper?"
4. [#] or [%] > Select the type of paper that will be loaded in Tray 1
5. [Yes]> "Tray Paper Setting?"> [Yes] "Tray1?"> [Yes]> "Paper Type?"
6. [#] or [%] > "Paper Size?> [Yes]
7. [#] or [%] > Select the size of paper that will be loaded in Tray 1
8. [Yes]> "Tray Paper Setting?"
9. [Clear Modes> Standby
10. Cycle the machine off/on.
Do a Nozzle Check
1. [Menu]> "System Settings?"
To Next Page
Loading...
