Using the Operation Panel
J012/J013/J014 1-8 SM
Key/Indicator What It Does
14 Select Paper Tray Selects the paper feed source: Tray 1, Tray 2 (option), Multi
Bypass Tray (option).
15 Yes Press to enter an item selected from a menu or a value entered
with the 10-key pad.
16 No Cancels an operation or returns to the previous display in the
menu mode.
17 Resolution Toggles the resolution settings for scanning: STD (Standard),
H.Qty. (High Quality), Fast (draft). Also selects the resolution
for fax sending: Std, Detail, S-Fine, F/Ht.
18 Form Feed Press to print all data that remains in the machine when the
Data-in LED is on. Do this to force the machine too print data
received but not printed because the paper size or paper type
settings do not match.
19 Function Displays the operation screens of the printer, copier, or fax.
1.2.2 ENTERING TEXT
Occasionally you may need to enter text to do machine settings. Text entry is limited to
these keys:
All numbers and letters of the alphabet are entered with the number keys.
The asterisk key (&) is used to toggle between number and letter entry modes.
Press [&] to toggle between the number and text entry mode.
"[1]" appears on the operation panel display in the number entry mode.
"[A]" appears on the operation panel in text entry mode.
To enter numbers
Enter numbers with "[1]" on the operation panel display.
1. Press the number key to enter the number.
2. To enter the same number again, press [(] then press the same number key again.
3. To delete a number move ['] or [(] the cursor to the number to delete then press [No].
This deletes the number at the cursor position.
4. To enter a plus sign (+), minus sign (-), ampersand (&), or slash (/) press [#] then [(] to
To Next Page
Loading...
