Ricoh J012 - Conventions Used in this Manual

Conventions Used in This Manual
Machine References
This service manual describes servicing and maintenance of the three J012, J013, and j014
series machines:
Product
Code
Model No. Comments
J012
GX3000S
No ARDF, no fax, NIB is an option (requires installation)
J013
GX3000SF
NIB is an option (requires installation).
J014
GX3050SFN
NIB is standard (no NIB installation required)
The following options are available for the J012, J013, and J014.
No. Option Name For Machine
J509 Paper Feed Unit TK2000 J012/J013/J014
J507 Multi Bypass Tray Type BY1000 J012/J013/J014
J510 Network Interface Board Type GX4 J012/J013 (Standard for J014)
 The duplex unit attached to the back of the machine is standard for the
J012/J013/J014 and must always remain installed for the machines to operate
properly. The duplex unit can be easily removed, however, for servicing.
The J012/J013/J014 machines are provided with four starter print cartridges for installation.
Thereafter, the following print cartridges are used for all three machines.
No. Name
J737 Print Cartridge GC 21Y
CÓPIA NÃO CONTROLADA
CÓPIA NÃO CONTROLADA