Cleaning Procedures
J012/J013/J014 3-62 SM
4. Use the wrapped tip of the screwdriver to clean inside and around the right air vent [1]
and suction cap [2].
Clean the vent and cap carefully to avoid:
Damaging the movable feeler inside the right air vent [1]
Damaging the fragile lip of the suction cap [2[.
Do not insert the tip of the screwdriver down into either the right air vent or
suction cap.
5. Close the scanner unit.
6. Press the power button to switch the printer on.
To Next Page
Loading...
