Display Summary
J012/J013/J014 4-8 SM
Menu/Menu Item Function
Scan=000000
Full Color=000000
B&W=000000
Level Color=000000
Print Counter?
Engine Settings?
1 Paper Tray Prty? Specifies priority paper tray selection for paper feed. (Tray
1, Tray 2, Bypass). Default: Tray 1
Note: This function is not available until either or both
options (Tray 2 or Multi Bypass Tray) have been installed.
2 List/Test Print? Prints the System Summary that shows how the printer is
currently configured for operation.
Configuration Page. Prints the System Summary.
PCL Configuration. Available for the J014 only.
3 Pg-dry Prt Delay? Sets longer intervals between printed pages to allow more
time for ink to dry and prevent duplex-printed pages and
transparences from sticking together.
Duplex Unit. On/Off. Default: Off. Select "On" then [']
or [(] to select the time interval: 1, 2, 5, 10, 15, 20 sec.
Trans. On/Off. Default: Off. Select "On" then ['] or [(]
to select the time interval: 1, 2, 5, or 10 min.
4 Auto Continue? Determines how the machine handles a print job when the
specified paper size and type is not loaded in the tray.
On/Off/Immediate. Default: Off
Off: The job does not print if the specified paper size/type is
not loaded in the tray. The job will execute once the
specified paper size/type is loaded.
On: The job prints even if the specified paper size/type is
not loaded in the tray.
To Next Page
Loading...
