Image Correction
SM 4-49 J012/J013/J014
Trouble-
shooting
"*Please Wait*" displays until pattern printing is finished. Do not start any other
operation until printing stops.
5. Check the printed numbers and patterns.
The adjustment value appears to the left of the lightest gray square with straight
horizontal lines on both sides.
If this number is "+2", for example, then the adjustment value is "+2.”
If horizontal lines beside the gray square are broken, look at where the lines are
broken in the opposite direction.
For example, if the "+2" square is the lightest gray square and the "+6" lines are
broken, then the best adjustment value is between "+3" and "+5.”
6. [(] > "Adjust" > [Yes]
To Next Page
Loading...
