Example
Machine operation panel procedures are abbreviated to reduce the needless repetition of
words and make procedures easier to read.
What You See What This Means
1.[Menu] 1. Press the [Menu] key.
2. [#] or [%] > "System Settings?" > [Yes].
2. Press either the [#] or [%] key to
display "System Settings" then press
the [Yes] key.
3. [#] or [%] > "Language?" > [Yes]
3. Press either the [#] or [%] key to
display "Language" then press the [Yes]
key.
4. [#] or [%] to select the desired language >
[Yes]
4. Press either the [#] or [%] to show
the desired language then press the
[Yes] key.
5. [No] to return to the previous display.
5. Press the [No] key to return to the
previous display..
6. [Clear Modes] to return to standby.
6. Press [Clear Modes] to close the
menu and return to the standby
(operation) mode.
To Next Page
Loading...
