Installation Procedure
SM 1-19 J012/J013/J014
Installation
Never touch the metal contact plate on the rear side.
Each cartridge is marked with a color label.
The Cartridge End LED marks below the display show you the order of
insertion from left to right (K (Black), C (Cyan), M (Magenta), Y (Yellow).
4. Insert the black print cartridge in the first slot on the left.
5. Press on the area marked "PUSH" to insert the cartridge completely.
6. Install the other print cartridges in the same way.
7. Make sure that the four cartridges are inserted in this order, from left to right: K (Black),
C (Cyan), M (Magenta), Y (Yellow)
8. Close the right front cover.
To Next Page
Loading...
