Before Replacing Parts
J012/J013/J014 3-4 SM
Easy:
These procedures require setting the scanner unit in the full upright position.
Removal of left, right, and front cover may be required.
Removal of the scanner unit and back cover are not required.
Difficult:
Removal of all covers and the scanner unit and back cover are required.
Level 3: Require precision adjustment at factory (Not Replace in the field)
Component Comments
1 Carriage Unit
2 Ink Supply Pump Unit
3 Transport Belt
4 Charge Roller
5 Temperature/Humidity Sensor
6 Paper End Sensor
7 Paper Feed Roller
To Next Page
Loading...
