Ricoh PRO C7200S - Page 258

11 × 17 , 8
1
/
2
× 14 , 8
1
/
2
× 13 , 8
1
/
2
× 11 , 8
1
/
4
× 14 , 8
1
/
4
× 13 , 8 × 13
,
8 × 10 , 7
1
/
4
× 10
1
/
2
, 5
1
/
2
× 8
1
/
2
, 8K , 16K , 12 × 18 , 11 × 15 ,
11 × 14 , 10 × 15 , 10 × 14 , 13 × 19
1
/
5
, 13 × 19 , 12
3
/
5
× 19
1
/
5
,
12
3
/
5
× 18
1
/
2
, 13 × 18 , SRA3 , SRA4 , 8
1
/
2
× 13
2
/
5
, 4
1
/
5
× 5
1
/
2
,
Custom Size
Default: [Auto Detect]
Specify the paper size with the number keys when you select [Custom Size]. The paper sizes
that can be used differ depending on the machine's configuration.
• When the banner sheet tray of multi bypass tray (Tray A) is not installed:
Vertical: 100.0–330.2 mm (3.94–13.00 inches), Horizontal: 139.7–487.7 mm (5.50–
19.20 inches)
• When the banner sheet tray of multi bypass tray (Tray A) is installed:
Vertical: 210.0–330.2 mm (8.27–13.00 inches), Horizontal: 139.7–700.0 mm (5.50–
27.55 inches)
For details about auto detectable paper sizes, see page 207 "Recommended Paper Sizes
and Types".
• The lock mark ( ) is displayed next to the paper tray if [Apply Auto Paper Select] is not
enabled.
• The maximum weight of paper that can be loaded into the multi bypass tray (Tray A) is 216.0
g/m
2
(79.9 lb. Cover).
Interposer Upper and Lower Tray (when the interposer is installed)
This section explains the paper tray settings for the upper and lower trays of the interposer.
Paper Size
Auto Detect, A3 , A4 , A5 , B4 JIS , B5 JIS ,
11 × 17 , 8
1
/
2
× 14 , 8
1
/
2
× 13 , 8
1
/
2
× 11 , 8
1
/
4
× 14 , 8
1
/
4
× 13 , 8 × 13
,
8 × 10 , 7
1
/
4
× 10
1
/
2
, 5
1
/
2
× 8
1
/
2
, 8K , 16K , 12 × 18 , 11 × 15 ,
11 × 14 , 10 × 15 , 10 × 14 , 13 × 19
1
/
5
, 13 × 19 , 12
3
/
5
× 19
1
/
5
,
12
3
/
5
× 18
1
/
2
, 13 × 18 , SRA3 , SRA4 , 8
1
/
2
× 13
2
/
5
, Custom Size
Default: [Auto Detect]
You can specify a custom size between 139.7 and 330.2 mm (5.50 and 13.00 inches)
vertically, and between 139.7 and 487.7 mm (5.50 and 19.20 inches) horizontally.
For details about auto detectable paper sizes, see page 207 "Recommended Paper Sizes
and Types".
6. Paper Specifications and Adding Paper
256