Perfect Binder Interposer Upper and Lower Tray (when the perfect binder interposer is
installed)
This section explains the paper tray settings for the upper and lower trays of the perfect binder
interposer.
Paper Size
Auto Detect, A3 , B4 JIS , 11 × 17 , 8K , 12 × 18 , 11 × 15 , 13 × 19
1
/
5
,
13 × 19 , 12
3
/
5
× 19
1
/
5
, 12
3
/
5
× 18
1
/
2
, 13 × 18 , SRA3 , Custom Size
Default: [Auto Detect]
You can specify a custom size between 257.0 and 330.2 mm (10.12 and 13.00 inches)
vertically, and between 364.0 and 487.7 mm (14.34 and 19.20 inches) horizontally.
For details about auto detectable paper sizes, see page 207 "Recommended Paper Sizes
and Types".
Cover/Designation/Slip/Separation Sheet
This section explains the paper tray settings in the [Cover/Designation/Slip/Separation Sheet] menu
under [Tray Paper Settings].
Front Cover (Front Cover Sheet Tray)
You can specify and display the paper tray in which to load front cover sheets.
You can also specify the display time and copying method for duplex copying.
• Tray to Program
• Tray 1
• Tray 2
• Tray 3
• Tray 4
• Tray 5
• Tray 6
• Tray 7
• Tray 8
• Tray A
• Intpsr. Upper (when the interposer is installed.)
• Intpsr. Lower (when the interposer is installed.)
Default: Off (Tray is not specified.)
• Apply Duplex
• Yes
Changing Tray Paper Settings
257
To Next Page
Loading...
