Ricoh PRO C7200S - Page 327

0705 Letter Fold-out Position 1: 1 sheet Fold
Adjust the fold position of the bottom segment (S2) of letter foldout sheets (1 sheet fold) when using the
fold unit.
Press [ ] to increase and [ ] to reduce (S2).
This setting will be applied if the single-sheet fold function is enabled.
The mark indicates the leading edge (relative to the paper feed direction), and the mark indicates
the trailing edge.
Paper feed direction
S2
L
DWP563
Setting Items
Default
Value
Max.
Value
Min.
Value
Step Unit
A3 SEF
B4 JIS SEF
A4 SEF
0.0 4.0 -4.0 0.2 mm
B5 JIS SEF 0.0 3.0 -3.0 0.2 mm
12 × 18 SEF
11 × 17 SEF
8
1
/
2
× 14 SEF
8
1
/
2
× 11 SEF
8K SEF
Other Paper Sizes
0.0 4.0 -4.0 0.2 mm
0706 Letter Fold-out Position 1: Multi-sheet Fold
Adjust the fold position of the bottom segment of letter foldout sheets (multi-sheet fold) when using the
fold unit. This setting will be applied if the multi-sheet fold function is enabled.
Press [ ] to increase and [ ] to reduce (S2).
Setting Values
325