The mark indicates the leading edge (relative to the paper feed direction), and the mark indicates
the trailing edge.
Paper feed direction
S2
L
CWY008
Setting Items
Default
Value
Max.
Value
Min.
Value
Step Unit
B4 JIS SEF
A4 SEF
0.0 4.0 -4.0 0.2 mm
B5 JIS SEF 0.0 3.0 -3.0 0.2 mm
8
1
/
2
× 14 SEF
8
1
/
2
× 11 SEF
Other Paper Sizes
0.0 4.0 -4.0 0.2 mm
0707 Letter Fold-out Position 2: 1 sheet Fold
Adjust the overall fold size (L) of letter foldout sheets (1 sheet fold) when using the fold unit.
Press [ ] to increase and [ ] to reduce (L).
This setting will be applied if the single-sheet fold function is enabled.
The mark indicates the leading edge (relative to the paper feed direction), and the mark indicates
the trailing edge.
7. Adjustment Settings for Operators
326
To Next Page
Loading...
