1. In the destination list, press the key including the destination name.
The key of the selected destination is highlighted, and the destination appears in the destination
field at the top of the screen.
• If the target destination does not appear, display the destination by selecting its initial letter from the
title.
• Depending on the security setting, some destinations may not appear in the destination list.
Selecting destinations by entering the registration numbers
Select the destination from the machine's address book using its registration number.
1. Press [Reg. No.].
2. Using the number keys, enter the five-digit registration number assigned to the required
destination, and then press the [ ] key.
3. Press [OK].
9. Scan
376
To Next Page
Loading...
